A sleek two-digit counter that automatically advances from a single wheel spin. Four geometric designs, cat face, or monkey face versions available or put your own design on the blank version. Multi-color and single color files included. Change color/filament at layer height to do dual color on a single nozzle without the need for a filament switcher. Prints without supports.
*The clips are fragile and can break when snapping the top on. Matte and Silk filaments are not recommended for the top as they are especially weak. (You can just glue the top on if you don’t want to mess with the clips, but won’t be able to toke apart again later)
Assembly: Put the cam gear with the peg facing up on the middle peg with the peg aligned with the hole on the bottom of the case. Put the Tens Wheel (L) on the left (L) peg with the zero in the middle. Insert the lever, then put the Spin Wheel (R) on the right (R) peg with the zero in the middle. Make sure the gears spin and change correctly before snapping on the lid. slide two clips into place on one of the long sides and then press down along the short to long sides to snap the others in place.
